Grapples
Low Profile Grapple Bucket
Features
- Available in 68″, 74″, 78″, and 84″ sizes
- Removable End Plates
- 3/16″ Bucket Material
- 1/2″ End Plates
- 3/4″ Reversible Bolt on Cutting Edge
- 1/2″ Thick Grapples
- 3000lb hydraulic cylinders
- 1/2″ x 2-1/2″ under supports
- Visibility Slot
- Modified to fit a variety of tractor loader models
- Standard with Hoses, cylinders, and flat face couplers
Specifications
Width | 68″ | 74″ | 78″ | 84″ |
Overall Length | 34″ | 34″ | 34″ | 34″ |
Overall Height | 23″ | 23″ | 23″ | 23″ |
Grapple Opening | 39″ | 39″ | 39″ | 39″ |
Weight | 943lbs | 978lbs | 1007lbs | 1065lbs |
Learn more! https://jenkinsironandsteel.com/products/grapple-bucket
Skeleton Rock & Brush Grapple
Features
- Available in 62″, 68″, 74″, 78″, and 84″ sizes
- 3/8″ tine material with a 1” cold rolled shaft welded thru the center of all the teeth and tied together with a 1/2″ grade 50 hardened serrated cutting edge on the front side making this grapple ideal for back dragging, raking, wedging small trees, and even land leveling.
- 3″ spacing between teeth
- Fully greasable
- Removable bolt-on side plates
- Cylinder covers included
- Enclosed Grapples
- Standard with Hoses, cylinders, and flat face couplers
Specifications | |||||
Width | 62″ | 68″ | 74″ | 78″ | 84″ |
Bucket Depth | 37 1/2″ | 37 1/2″ | 37 1/2″ | 37 1/2″ | 37 1/2″ |
Overall Height | 31″ | 31″ | 31″ | 31″ | 31″ |
Spacing Between Teeth | 3″ | 3″ | 3″ | 3″ | 3″ |
Cutting Edge | 1/2″ Grade 50 | 1/2″ Grade 50 | 1/2″ Grade 50 | 1/2″ Grade 50 | 1/2″ Grade 50 |
Grapple Opening | 38″ | 38″ | 38″ | 38″ | 38″ |
Weight LBS | 914 | 961 | 1024 | 1058 | 1106 |
Get More information here – https://jenkinsironandsteel.com/products/skeleton-rock-and-brush-grapple
Debris Grapple
Features
- Available in 68″, 78″, and 84″ sizes
- Similar to the skeleton grapple except with 6” spacing between the tines
- Great for grabbing larger debris and material.
- 1/2″ tine material
- 1/2″ hardened cutting edge
- 6″ spacing between teeth
- Cylinder covers included
- Removable side plates
- Enclosed Grapples
- Standard with Hoses, cylinders, and flat face couplers
Specifications
Width | 64″ | 72″ | 78″ | 84″ |
Height | 31″ | 31″ | 31″ | 31″ |
Depth | 36″ | 36″ | 36″ | 36″ |
Weight (lbs) | 964 | 990 | 1024 | 1062 |
Grapple Opening | 37″ | 37″ | 37″ | 37″ |
Learn more! https://jenkinsironandsteel.com/products/debris-grapple
Brush Grapple
Features
- 3/4″ material gusseted with 3/8″ thickness for durability
- Unique serrated teeth for biting and holding material
- Replaceable tip dirt teeth for root raking and ground ripping
- Easily move logs, brush, trash, large rocks, and demolition debris with this grapple
- 2 – 3000lb hydraulic cylinders
- Can be modified to fit a variety of tractor loader models
- Holds up to even the largest skid steers
- Commercial Grade!!
Specifications
Overall Width | 66″ | 76″ | 86″ |
Overall Length | 32″ | 32″ | 32″ |
Overall Height (Closed) | 36″ | 36″ | 36″ |
Overall Height (Open) | 58″ | 58″ | 58″ |
Opening | 50″ | 50″ | 50″ |
Lower Bucket Material | 3/4″ Grade 50 | 3/4″ Grade 50 | 3/4″ Grade 50 |
Weight (lbs) | 1213 | 1306 | 1412 |
Learn More here – https://jenkinsironandsteel.com/products/brush-grapple
Brush Grapple – Super Duty Split Grapples
Features
- Independent grapple arms
- 3/4″ material gusseted with 3/8″ thickness for durability
- Unique serrated teeth for biting and holding material
- Replaceable tip dirt teeth for root raking and ground ripping
- Easily move logs, brush, trash, large rocks, and demolition debris with this grapple
- 2 – 3000lb hydraulic cylinders
- Can be modified to fit a variety of tractor loader models
- Holds up to even the largest skid steers
- Commercial Grade!!
Specifications
Overall Width | 76″ | 86″ |
Overall Length | 32″ | 32″ |
Overall Height (Closed) | 36″ | 36″ |
Overall Height (Open) | 58″ | 58″ |
Opening | 50″ | 50″ |
Lower Bucket Material | 3/4″ Grade 50 | 3/4″ Grade 50 |
Weight (lbs) | 1610 | 1750 |
Learn more! https://jenkinsironandsteel.com/products/super-duty-brush-grapple
Tine Grapple
Features
- Available in 63″, 70″, 78″, 83″, and 88″ sizes
- Also called manure forks or silage forks
- Dual cylinder
- Replaceable 2 ¼” thick tine
- 34.5″ tine length
- 1/2″ grapple claw thickness
- 4.25″ spacing between tines
- Can be modified to fit a variety of tractor loader models
Specifications
Width | 63″ | 70″ | 78″ | 83″ | 88″ |
Height | 32″ | 32″ | 32″ | 32″ | 32″ |
Tine Length | 34.5″ | 34.5″ | 34.5″ | 34.5″ | 34.5″ |
Grapple Opening | 36″ | 36″ | 36″ | 36″ | 36″ |
Weight (lbs) | 1044 | 1142 | 1240 | 1298 | 1356 |
Get more information here! https://jenkinsironandsteel.com/products/tine-grapple
High Capacity Grapples
Features
- A huge 80″ Opening makes this an ideal grapple for moving silage, round bales, manure and pretty much anything else you can think of!
- Available in 6′, 7′, 8′ Widths
- Heavy Duty Bucket
- 3/4″ replaceable gusseted teeth
- 1/2″ x 2-1/2″ Under supports throughout the bottom of the bucket
- 3/4″ Bolt-on reversible cutting edge
- Modified to fit a variety of tractor loader models
Specifications
Width | 6′ | 7′ | 8′ |
Depth | 40″ | 40″ | 40″ |
Height | 36″ | 36″ | 36″ |
Opening | 80″ | 80″ | 80″ |
Tine Thickness | 3/4″ | 3/4″ | 3/4″ |
Weight LBS | 1306 | 1420 | 1534 |
Tines Per size | 4 | 5 | 6 |
Tell me more! https://jenkinsironandsteel.com/products/high-capacity-grapples
Stump Bucket Grapple
Features
- 1/2″ Steel bucket
- 18″ tapered to 12″ Wide Bucket made out of 1/2″ Steel
- 3 Replaceable Digger Teeth
- Serrated teeth on the top edge of the bucket
- Grapple opens to 66″
Specifications
Bucket Width | 18″ Tapered to 12″ |
Overall Length | 64″ |
Height | 20″ |
Bucket Material | 1/2″ Grade 50 |
Weight | 680 LBS |
Learn more here https://jenkinsironandsteel.com/products/stump-bucket-grapple